Sew a cushion with piped edging

#v16136

Make stuffed piped edging on a homemade cushion for a beautiful finish. Mix patchwork fabric for unique cushions. You can use this technique for piped edging for your cushions, along your collar or on the front of your handbag.

#v16136
Select products for the idea

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Total price
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Guide step %d
1   Cut two squares, each measuring 43 x 43 cm.
Guide step %d
2   Cut bias binding for piped edging. First divide the fabric at an angle so that you get a long side. Measure 3 cm, mark, and cut at an angle of the fabric. Cut 4 strips for bias binding.
Guide step %d
3   Sew the strips of fabric (bias binding) together to make one long one. Sew them together with a 1 cm seam allowance. Please note that the edge should be flush so that 1 cm of excess goes out over each side. Secure the seam at the start and the end.
Guide step %d
4   Press the seam with an iron. Trim the seams (across) so that each seam now measures 3 mm.
Guide step %d
5   Sew a casing in the left side of the bias binding. Feed the wool through the casing.
Guide step %d
6   Sew the bias binding onto the right side of one of the cushion squares. Sew in the same stitching as the casing and stop 1 cm before you reach the corner. Leave the sewing machine needle in the fabric, lift the sewing machine presser foot. Cut a notch in the seam of the bias binding (i.e. the piped edging) and stop a couple of millimetres from the needle.
Guide step %d
7   Turn the cushion square and sew along the next side, attaching the piped edging in the same stitching as the casing. Carry on all the way around all four sides of the cushion square.
Guide step %d
8   Cut the yarn, making sure that the ends are touching. Fold the seam of the piped edging on one side inwards and around the piped edging on the opposite side, thus closing the piped edging. Secure in the same stitching as the casing.
Guide step %d
9   Insert a pin in the corner of the piped edging to keep it down. Sew the cushion cover together, right side against right side. Leave a 20 cm opening for turning the cushion cover inside out and for putting the cushion inside the cushion cover.
Guide step %d
10   Insert the cushion inside the cushion cover. Fold the seam inwards from the right side. Sew just below the piped edging in the same stitching.
Also go exploring in

More Information

Make stuffed piped edging on a homemade cushion for a beautiful finish. Mix patchwork fabric for unique cushions. You can use this technique for piped edging for your cushions, along your collar or on the front of your handbag.

More Information
SKUv16136

Description

Copyright © 2021-present Magento, Inc. All rights reserved.