How to make homemade bars of soap

#v16097

Make your own handmade bars of soap in beautiful colours using clear and white soap base. Melt the soap base either in a water bath or in the microwave. You will need 50 g soap base per finished square of soap. The amount of soap dye paste depends on how strong you want the colour. The clear soap base needs less soap dye paste than the white soap base. Place your bar of soap in a soap dish, allowing it to dry out between each use.

Select products for the idea

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Total price
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Guide step %d
1   You will need 50 g soap base per finished square of soap in the mould. Weigh 150 g soap base and cut into chunks. We recommend you use gloves when melting the soap base.
Guide step %d
2   Wash the mould and spray it with rubbing alcohol. Wipe it well to make sure it's completely dry prior to use.
Guide step %d
3   You can melt the soap base either in a water bath or in a microwave. Melt in the microwave with 30 second intervals at 80% power and stir between each interval to prevent heat damage.
Guide step %d
4   Pour the molten soap into the mould. Remove any air bubbles from the surface by spraying with rubbing alcohol.
Guide step %d
5   When dyeing white soap base: Melt 150 g soap base as described in step 3. Colour the molten soap by adding 2 cm soap dye paste and stir well.
Guide step %d
6   Pour the molten soap into the remaining compartments in the mould.
Guide step %d
7   Remove any air bubbles from the surface as explained in step 4.
Guide step %d
8   Follow the same procedure when using clear soap base. Repeat steps 1-4.
Guide step %d
9   Use a smaller amount of soap dye paste when dyeing clear soap. Melt 150 g clear soap base to make three bars of soap and add 1 cm soap dye paste.
Guide step %d
10   Pour the coloured molten soap into the remaining compartments in the mould. Remove any air bubbles from the surface as described in step 4.
Guide step %d
11   Examples of coloured bars of soap made from clear soap base and white soap base.
Also go exploring in

More Information

Make your own handmade bars of soap in beautiful colours using clear and white soap base. Melt the soap base either in a water bath or in the microwave. You will need 50 g soap base per finished square of soap. The amount of soap dye paste depends on how strong you want the colour. The clear soap base needs less soap dye paste than the white soap base. Place your bar of soap in a soap dish, allowing it to dry out between each use.

More Information
SKUv16097

Description

Copyright © 2021-present Magento, Inc. All rights reserved.