Place Mats and Coasters made from knitted Tube

#v15585

Make your own place mats and coasters from knitted tube. They are knitted from Merino wool baby yarn using a knitting mill and then sewn together into a circle.

Select products for the idea

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Total price
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Guide step %d
1   Knit 7.5 m knitted tube using a knitting mill. You will need approx. 7.5 m knitted tube for a 26 cm diameter place mat. Each ball of wool produces an approx. 13 m knitted tube.
Guide step %d
2   Pick up the stitches with a yarn needle as shown in the picture. Secure by pulling the yarn through the four stitches and back through the last two stitches.
Guide step %d
3   Secure the knitted tube by feeding the end through the tube and trim the excess yarn.
Guide step %d
4   Cut another piece of yarn measuring approx. 1 m. Secure the yarn at one end of the tube as shown in the picture and start sewing the knitted tube into a circle using a yarn needle. Begin at the 2nd stitch.
Guide step %d
5   Sew the knitted tube together into a circle by sewing into the same row of stitches all the way around, for a uniform place mat.
Guide step %d
6   Continue until you reach your chosen size and trim the excess knitted tube.
Guide step %d
7   Unravel the knitted tube at one end, leaving enough yarn to secure the end.
Guide step %d
8   Pick up the four stitches with a yarn needle and secure the end of the place mat with the unravelled yarn as illustrated in the picture.
Guide step %d
9   Secure the yarn end onto the place mat as described in step 2.
Guide step %d
10   Finish as illustrated in the picture.
Guide step %d
11   Finally steam the place mat on the “wrong” side using an iron.
Guide step %d
Another variant   Knit approx. 115 cm knitted tube for coasters, each measuring 10 cm in diameter.
Also go exploring in
Copyright © 2021-present Magento, Inc. All rights reserved.