How to make handmade tags from paper pulp using shape cutters

#v15911

Learn how to make tags from paper pulp using shape cutters. A piece of twine is attached to the tags.

#v15911
Select products for the idea

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Total price
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Guide step %d
1   Moisten the paper pulp and tear it into small pieces. Leave it to soak completely.
Guide step %d
2   Whisk the paper pulp to a uniform consistency either with a hand whisk or an electrical hand mixer.
Guide step %d
3   Pour a thin mixture of the pulp into a cup. Place the shape cutters on the paper making frame mould and pour the mixture inside the shape cutter. Fill in the entire shape cutter.
Guide step %d
4   Gently push the pulp mixture inside the shape cutter.
Guide step %d
5   Fold a piece of felt and run it across the underneath of the frame to soak up the water. Squeeze out the water and continue like this until most of the water is absorbed.
Guide step %d
6   Remove the shape cutters.
Guide step %d
7   Turn over the frame and place it with the pulp face down onto a piece of felt.
Guide step %d
8   Soak up more water but only press lightly.
Guide step %d
9   Carefully remove the frame. Make sure that the pulp section comes away from the frame before lifting it. Leave the homemade piece of paper on the felt to dry. The drying time varies according to room temperature (24-48 hours).
Guide step %d
10   Make holes in the tags using a screw punch. Attach a piece of natural twine for hanging.
Also go exploring in
Copyright © 2021-present Magento, Inc. All rights reserved.