Click Ornaments with Graphic Designs as Prints

#v13147

Prior to assembly, decorate the punched-out Click ornaments with a graphic design made with black stamp ink from a stamp pad and a silicon stamp on an acrylic block. When dry, assemble the Click ornaments and attach of waxed cotton string for hanging.

Select products for the idea

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Total price
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Guide step %d
1.   Dab the foam stencil brush in black stamp ink from the stamp pad. Dab the ink onto the silicon stamp which is attached onto an acrylic block.
Guide step %d
2.   Use the silicon stamp for making one or more stamp prints on the not yet assembled Click ornaments.
Guide step %d
3.   Rinse the silicon stamp in lukewarm water immediately after use. Let the stamped prints dry before assembling the Click ornaments as shown in the next ten steps. Alternatively, see the Tutorial video!
Guide step %d
4.   Lightly press the embossed lines on the sides of the ornaments.
Guide step %d
5.   Fold in one flap at the top.
Guide step %d
6.   Assemble the strip.
Guide step %d
7.   Unfold the folded flap on the back.
Guide step %d
8.   Connect the two strips as shown.
Guide step %d
9.   Weave in the third strip between the other strips.
Guide step %d
10.   Assemble it over the assembly of the previous strip.
Guide step %d
11.   -
Guide step %d
12.   Press in the embossed lines.
Guide step %d
13.   All the way around.
Guide step %d
14.   A string for hanging: Make a hole in the Click ornament using a darning needle. Tie a knot on the waxed cotton string and push the knot inside the hole.
Guide step %d
15.   Close the hole with a small blob of glue.
Also go exploring in
Copyright © 2021-present Magento, Inc. All rights reserved.