Make your own Clock with Clock Mechanism and Silk Clay

#v15560

The clock mechanism is covered with Silk Clay. Subsequently a figure and a stand is modelled around the clock mechanism, ensuring that the clock can stand independently. We have chosen extra small hands for the teapot.

Select products for the idea

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Total price
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Guide step %d
1   Model Silk Clay around the front of the clock mechanism. Please take care not to cover the opening for the battery compartment. Leave approx. 1 cm of the shaft uncovered as the clock hands will have to be attached to the shaft later on.
Guide step %d
2   Model a Silk Clay figure around the clock mechanism. Make Silk Clay numbers for attaching onto the figure and leave to dry for 24 hours lying down on a plastic pocket or a similar transparent surface.
Guide step %d
3   Attach the clock hands by attaching the flat metal disc first, then a screw and then finally click on the clock hands. You may shorten the clock hands with a pair of scissors if they are too long.
Guide step %d
4   Attach the figure onto its Silk Clay stand. Place the figure vertically against a support so that it can stand independently when dry. Insert an AA battery in the clock mechanism and let time pass.
Also go exploring in
Copyright © 2021-present Magento, Inc. All rights reserved.